HP EliteBook 8570w HP EliteBook 8570w Mobile Workstation Maintenance and Servi - Page 87
Power button board, Upgrade bay device see
View all HP EliteBook 8570w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Power button board Description Power button board Spare part number 690634-001 Before removing the power button board, follow these steps: IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 46). 5. Remove the service door (see Service door on page 52). 6. Remove the following components: a. Hard drive (see Hard drive on page 63). b. Upgrade bay device (see Upgrade bay device on page 68). c. Keyboard (see Keyboard on page 72). d. Top cover (see Top cover on page 76). Remove the power button board: 1. Position the top cover upside down, with the front toward you. 2. Remove the two pieces of tape from the top of the power button board (1). 3. Release the ZIF connector (2) for the power button board cable and then disconnect the cable (3). Component replacement procedures 79