HP Evo n410c Compaq Evo N400c and N410c Notebook PCs - Maintenance and Service - Page 103
Removing the Hard Drive, Place the hard drive in an electrostatic-safe container.
View all HP Evo n410c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Removal and Replacement Procedures 3. Remove the hard drive spacer 1 from the base enclosure (Figure 5-15). ✎ The hard drive spacer is included in the Miscellaneous Plastics Kit (spare part number 231454-001). 4. Grasp the hard drive tab and slide the hard drive to the left 2. 5. Remove the hard drive. 6. Place the hard drive in an electrostatic-safe container. Figure 5-15. Removing the Hard Drive Reverse the above procedure to install the hard drive. Ä CAUTION: When installing the hard drive, make sure the speaker and modem/NIC cables are not crimped between the back edge of the hard drive and the base enclosure. 5-18 Maintenance and Service Guide
5–18
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the hard drive spacer
1
from the base enclosure
(Figure 5-15).
✎
The hard drive spacer is included in the Miscellaneous Plastics
Kit (spare part number 231454-001).
4. Grasp the hard drive tab and slide the hard drive to the left
2
.
5. Remove the hard drive.
6. Place the hard drive in an electrostatic-safe container.
Figure 5-15. Removing the Hard Drive
Reverse the above procedure to install the hard drive.
Ä
CAUTION:
When installing the hard drive, make sure the speaker
and modem/NIC cables are not crimped between the back edge of
the hard drive and the base enclosure.