HP Evo n410c Compaq Evo N400c and N410c Notebook PCs - Maintenance and Service - Page 114
Removing the Display, Remove the four TM2.0 × 6.0 screws
View all HP Evo n410c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Removal and Replacement Procedures 2. Disconnect the display signal 1 and backlight 2 cables from the system board (Figure 5-23). ✎ When the display screws are removed, the display assembly is unsupported. Make sure to provide support for the display assembly when removing the display screws. 3. Remove the four TM2.0 × 6.0 screws 3 that secure the display to the base enclosure. 4. Remove the display. Figure 5-23. Removing the Display Maintenance and Service Guide 5-29
Removal and Replacement Procedures
Maintenance and Service Guide
5–29
2. Disconnect the display signal
1
and backlight
2
cables from
the system board (Figure 5-23).
✎
When the display screws are removed, the display assembly is
unsupported. Make sure to provide support for the display
assembly when removing the display screws.
3. Remove the four TM2.0 × 6.0 screws
3
that secure the
display to the base enclosure.
4. Remove the display.
Figure 5-23. Removing the Display