HP Evo n410c Compaq Evo N400c and N410c Notebook PCs - Maintenance and Service - Page 123
Evo Notebook N410c models only, Removing the System Board Screw
View all HP Evo n410c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Removal and Replacement Procedures 4. Turn the base enclosure bottom side up with the rear panel facing forward. 5. Remove the PM2.0 × 7.0 barrel screw 1 that secures the system board to the base enclosure (Figure 5-30). 6. Evo Notebook N410c models only-Remove the PM2.0 × 4.0 screw 2 that secures the system board to the base enclosure. Figure 5-30. Removing the System Board Screw 5-38 Maintenance and Service Guide
5–38
Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the base enclosure bottom side up with the rear panel
facing forward.
5. Remove the PM2.0 × 7.0 barrel screw
1
that secures the
system board to the base enclosure (Figure 5-30).
6.
Evo Notebook N410c models only
—Remove the
PM2.0 × 4.0 screw
2
that secures the system board to the
base enclosure.
Figure 5-30. Removing the System Board Screw