HP G62-229NR Service Guide - Page 58

from the hard drive bay., Disconnect the hard drive cable from the system board

Get HP G62-229NR PDF manuals and user guides View all HP G62-229NR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

3. Lift the left side of the hard drive cover (2), swing it forward, and remove the cover (3). The hard drive cover is included in the plastics kit, spare part number 595200-001. 4. Remove the three Phillips PM2.5×5.0 screws (1) that secure the hard drive to the computer. 5. Use the hard drive bracket to lift the hard drive out (2) of the hard drive compartment. 6. Disconnect the hard drive cable from the system board (3). 7. Remove the hard drive (4) from the hard drive bay. 8. To replace the hard drive bracket, remove the four Phillips PM3.0×4.0 screws (1) that secure the hard drive bracket to the hard drive 48 Chapter 4 Removal and replacement procedures ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
3.
Lift the left side of the hard drive cover
(2)
, swing it forward, and remove the cover
(3)
. The hard
drive cover is included in the plastics kit, spare part number 595200-001.
4.
Remove the three Phillips PM2.5×5.0 screws
(1)
that secure the hard drive to the computer.
5.
Use the hard drive bracket to lift the hard drive out
(2)
of the hard drive compartment.
6.
Disconnect the hard drive cable from the system board
(3)
.
7.
Remove the hard drive
(4)
from the hard drive bay.
8.
To replace the hard drive bracket, remove the four Phillips PM3.0×4.0 screws
(1)
that secure the
hard drive bracket to the hard drive
48
Chapter 4
Removal and replacement procedures
ENWW