HP G62-400 HP G62 Notebook PC - Maintenance and Service Guide - Page 68
Remove the top cover, Lift the rear edge of the top cover
View all HP G62-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
6. Release the power button ZIF connector (1), speaker cable (2), touchpad ZIF connector (3), and touchpad button ZIF connector (4). 7. Lift the rear edge of the top cover (1) until the top cover disengages from the base enclosure. Remove the top cover (2). NOTE: The TouchPad is glued to the top cover and is included with the top cover spare part. Reverse this procedure to install the switch cover. 58 Chapter 4 Removal and replacement procedures
6.
Release the power button ZIF connector
(1)
, speaker cable
(2)
, touchpad ZIF connector
(3)
, and
touchpad button ZIF connector
(4)
.
7.
Lift the rear edge of the top cover
(1)
until the top cover disengages from the base enclosure.
Remove the top cover
(2)
.
NOTE:
The TouchPad is glued to the top cover and is included with the top cover spare part.
Reverse this procedure to install the switch cover.
58
Chapter 4
Removal and replacement procedures