HP G62-400 HP G62 Notebook PC - Maintenance and Service Guide - Page 75

USB board, from the system board.

Page 75 highlights

USB board Description USB board Spare part number 606011-001 Before removing the USB board: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see Battery on page 41). 5. Remove the following components: a. Hard drive (see Hard drive on page 42) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 53) d. Top cover (see Top cover on page 56) Remove the USB board: 1. Position the computer upright with the right side toward you. 2. Disconnect the USB board cable (1) from the system board. 3. Remove the Phillips PM2.5×6.0 screw (2) that secures the USB board to the base enclosure. 4. Lift the USB board (3) straight up to remove it from the computer. The USB cable is available with the cable kit using spare part number 606009-001 Component replacement procedures 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135

USB board
Description
Spare part number
USB board
606011-001
Before removing the USB board:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
41
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive
on page
42
)
b.
Optical drive (see
Optical drive
on page
45
)
c.
Keyboard (see
Keyboard
on page
53
)
d.
Top cover (see
Top cover
on page
56
)
Remove the USB board:
1.
Position the computer upright with the right side toward you.
2.
Disconnect the USB board cable
(1)
from the system board.
3.
Remove the Phillips PM2.5×6.0 screw
(2)
that secures the USB board to the base enclosure.
4.
Lift the USB board
(3)
straight up to remove it from the computer. The USB cable is available
with the cable kit using spare part number 606009-001
Component replacement procedures
65