HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 54

Cause: The PDH FPGA IPR is not cleared after a MAX_RD_CLR_IPR_TRIES on

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Event ID Event Severity Event Description 8747 Error Firmware was unable to find a suitable block of main memory to relocate ROM. Probable Cause: Probably caused by lots of PDT entries, or no main memory present. WBEM EventID: 1036. WBEM ProviderName: FPL_IndicationProvider 8752 Warning Cell started OLA but is not configured in the complex profile of the partition. Probable Cause: Cell was issued an OLA command without first updating the complex profile to reflect its slot as configured in the partition. Recommended Action: Update the complex profile to include the new cell. WBEM EventID: 6955. WBEM ProviderName: FPL_IndicationProvider 8756 Error The Options service received an NVRAM allocation error. Probable Cause: Invalidate NVRAM and reset. WBEM EventID: 808. WBEM ProviderName: FPL_IndicationProvider 8757 Warning failure on OLA cell during attempt to synch its real-time clock. Probable Cause: Couldn't communicate with OLA cell. Recommended Action: Collect IPMI events and contact HP Support. WBEM EventID: 6956. WBEM ProviderName: FPL_IndicationProvider 8758 Warning SAL errlog access timeout. Probable Cause: Firmware is taking too long to process requests. WBEM EventID: 810. WBEM ProviderName: FPL_IndicationProvider 8761 Warning The Dillon IPR is not cleared after a MAX_RD_CLR_IPR_TRIES on a cell. Probable Cause: The PDH FPGA IPR is not cleared after a MAX_RD_CLR_IPR_TRIES on a cell. Recommended Action: Contact HP Support personnel to troubleshoot the problem. WBEM EventID: 2442. WBEM ProviderName: FPL_IndicationProvider 8762 Warning Indicated the Dillon IPR is not cleared after a number of PDC attempts. Probable Cause: PDH FPGA IPR is not cleared after a number of PDC attempts. Recommended Action: Contact HP Support personnel to troubleshoot the problem. WBEM EventID: 1759. WBEM ProviderName: FPL_IndicationProvider 8763 Error failed accessing the core cell RTC while synchronizing the OLA cell's RTC. Probable Cause: Core cell data could not be accessed/fabric connections went bad Recommended Action: Collect IPMI events and contact HP Support. WBEM EventID: 6957. WBEM ProviderName: FPL_IndicationProvider 8768 Warning The echelon given in the data field is not fully populated. Probable Cause: the specified echelon is not fully populated and is not usable Recommended Action: add or replace dimms in the specified echelon WBEM EventID: 816. WBEM ProviderName: FPL_IndicationProvider 8771 Warning Attempted to read the port state from an illegal port number. Probable Cause: An invalid port number has been provided. The port number will be converted to an internal port and processing should continue. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 817. WBEM ProviderName: FPL_IndicationProvider 8772 Warning Attempted to write the port state for an illegal port. Probable Cause: An invalid port number has been provided. The port number will be converted to an internal port and processing should continue. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 818. WBEM ProviderName: FPL_IndicationProvider 8784 Warning The main backplane is reporting the LPM status as fault. Probable Cause: Many possible causes, repair / replace the appropriate part. WBEM EventID: 1760. WBEM ProviderName: FPL_IndicationProvider 8787 Warning The IO backplane is reporting a LPM status as fault. Probable Cause: Service / replace the appropriate part of, or the entire backplane. WBEM EventID: 1762. WBEM ProviderName: FPL_IndicationProvider 8797 Error System firmware was unable to default the complex profile. Probable Cause: Needed information could not be obtained. Reset the MP. WBEM EventID: 822. WBEM ProviderName: FPL_IndicationProvider 54 WBEM Provider Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Event Description
Event Severity
Event ID
Firmware was unable to find a suitable block of main memory to relocate ROM.
Probable Cause: Probably caused by lots of PDT entries, or no main memory present.
WBEM EventID: 1036. WBEM ProviderName: FPL_IndicationProvider
Error
8747
Cell started OLA but is not configured in the complex profile of the partition. Probable
Cause: Cell was issued an OLA command without first updating the complex profile
to reflect its slot as configured in the partition. Recommended Action: Update the
complex profile to include the new cell. WBEM EventID: 6955. WBEM ProviderName:
FPL_IndicationProvider
Warning
8752
The Options service received an NVRAM allocation error. Probable Cause: Invalidate
NVRAM and reset. WBEM EventID: 808. WBEM ProviderName:
FPL_IndicationProvider
Error
8756
failure on OLA cell during attempt to synch its real-time clock. Probable Cause:
Couldn't communicate with OLA cell. Recommended Action: Collect IPMI events
and contact HP Support. WBEM EventID: 6956. WBEM ProviderName:
FPL_IndicationProvider
Warning
8757
SAL errlog access timeout. Probable Cause: Firmware is taking too long to process
requests. WBEM EventID: 810. WBEM ProviderName: FPL_IndicationProvider
Warning
8758
The Dillon IPR is not cleared after a MAX_RD_CLR_IPR_TRIES on a cell. Probable
Cause: The PDH FPGA IPR is not cleared after a MAX_RD_CLR_IPR_TRIES on a
cell. Recommended Action: Contact HP Support personnel to troubleshoot the
problem. WBEM EventID: 2442. WBEM ProviderName: FPL_IndicationProvider
Warning
8761
Indicated the Dillon IPR is not cleared after a number of PDC attempts. Probable
Cause: PDH FPGA IPR is not cleared after a number of PDC attempts. Recommended
Action: Contact HP Support personnel to troubleshoot the problem. WBEM EventID:
1759. WBEM ProviderName: FPL_IndicationProvider
Warning
8762
failed accessing the core cell RTC while synchronizing the OLA cell's RTC. Probable
Cause: Core cell data could not be accessed/fabric connections went bad
Recommended Action: Collect IPMI events and contact HP Support. WBEM EventID:
6957. WBEM ProviderName: FPL_IndicationProvider
Error
8763
The echelon given in the data field is not fully populated. Probable Cause: the specified
echelon is not fully populated and is not usable Recommended Action: add or replace
dimms in the specified echelon WBEM EventID: 816. WBEM ProviderName:
FPL_IndicationProvider
Warning
8768
Attempted to read the port state from an illegal port number. Probable Cause: An
invalid port number has been provided. The port number will be converted to an
internal port and processing should continue. Recommended Action: Contact HP
Support personnel to analyze the fabric. WBEM EventID: 817. WBEM ProviderName:
FPL_IndicationProvider
Warning
8771
Attempted to write the port state for an illegal port. Probable Cause: An invalid port
number has been provided. The port number will be converted to an internal port
and processing should continue. Recommended Action: Contact HP Support personnel
to analyze the fabric. WBEM EventID: 818. WBEM ProviderName:
FPL_IndicationProvider
Warning
8772
The main backplane is reporting the LPM status as fault. Probable Cause: Many
possible causes, repair / replace the appropriate part. WBEM EventID: 1760. WBEM
ProviderName: FPL_IndicationProvider
Warning
8784
The IO backplane is reporting a LPM status as fault. Probable Cause: Service / replace
the appropriate part of, or the entire backplane. WBEM EventID: 1762. WBEM
ProviderName: FPL_IndicationProvider
Warning
8787
System firmware was unable to default the complex profile. Probable Cause: Needed
information could not be obtained. Reset the MP. WBEM EventID: 822. WBEM
ProviderName: FPL_IndicationProvider
Error
8797
54
WBEM Provider Event Tables