HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 81

Incompatible I/O Backplane or I/O cables installed. Probable Cause: Incorrect I/O

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

Event ID Event Severity Event Description 10622 Warning Unexpected return from an Arches Fabric vertex module function while copying a cell's graph. Data field: return value from vertex module function. Probable Cause: Internal firmware error or data corruption. Recommended Action: Capture IPMI event logs, look for additional errors. Contact your HP Support Representative to analyze the fabric WBEM EventID: 4528. WBEM ProviderName: FPL_IndicationProvider 10623 Warning The checksum update for the PDT has failed. Probable Cause: The call to update the checksum for the PDT failed. The PDT will most likely be cleared upon reboot. Recommended Action: Reboot Upgrade SFW Contact HP support WBEM EventID: 4529. WBEM ProviderName: FPL_IndicationProvider 10625 Warning The checksum in the memory area of NVM is bad. Probable Cause: The checksum in the memory area of NVM is bad. Recommended Action: Upgrade SFW Contact HP support WBEM EventID: 4530. WBEM ProviderName: FPL_IndicationProvider 10626 Warning Checksum calculation failed. Probable Cause: The checksum calculation failed. The data field contains the address that the checksum calculation was attempted on. Recommended Action: Upgrade SFW Contact HP support WBEM EventID: 4531. WBEM ProviderName: FPL_IndicationProvider 10628 Warning Both SAL's copy and BMC copy of the token specified in the data field is bad. Probable Cause: Both SAL's copy and BMC copy of the token specified in the data field is bad. SFW is reinitializing that token to it's default value Recommended Action: Verify that the default settings are appropriate. For example, run the EFI baud and boot test command. WBEM EventID: 4532. WBEM ProviderName: FPL_IndicationProvider 10629 Error Incompatible I/O Backplane or I/O cables installed. Probable Cause: Incorrect I/O backplane and/or I/O backplane cables are connected to the cell board. The cell board is not compatible with I/O backplane and/or I/O backplane cables. Recommended Action: Remove I/O backplane and/or I/O backplane cables and replace with compatible I/O backplane and/or I/O backplane cables. WBEM EventID: 4533. WBEM ProviderName: FPL_IndicationProvider 10698 Warning The fPar identified by the event detail will be unusable. Probable Cause: Firmware ran out of NVRAM before the server completed cold boot initialization. Recommended Action: Initialize the NVRAM to the factory defaults and reset the server. Soft partitions will have to be recreated from scratch before they are available. WBEM EventID: 4667. WBEM ProviderName: FPL_IndicationProvider 10702 Error Firmware is out of NVRAM and cannot built the ILM memory slice device map. Probable Cause: Firmware ran out of NVRAM before the server completed cold boot initialization. Recommended Action: Initialize the NVRAM to the factory defaults and reset the server. Soft partitions will have to be recreated from scratch before they are available. WBEM EventID: 4671. WBEM ProviderName: FPL_IndicationProvider 10703 Error The NVRAM for the CPU map is corrupt and cannot be trusted. It appears that there are more CPUs in the map than the size of the map can hold. Probable Cause: NVRAM corruption of fPars specific database. Recommended Action: Restore NVRAM to factory defaults. Reset server and reconfigure soft partitions. WBEM EventID: 4672. WBEM ProviderName: FPL_IndicationProvider 10704 Error The NVRAM for the IO device ownership map is corrupt and cannot be trusted. It appears that there are more IO devices in the map than the size of the map can hold. Probable Cause: NVRAM corruption of fPars specific database. Recommended Action: Restore NVRAM to factory defaults. Reset server and reconfigure soft partitions. WBEM EventID: 4673. WBEM ProviderName: FPL_IndicationProvider 10705 Error The NVRAM for the cell local memory map is corrupt and cannot be trusted. It appears that there are more memory slices in the map than the size of the map can hold. Probable Cause: NVRAM corruption of fPars specific database. Recommended Action: Restore NVRAM to factory defaults. Reset server and reconfigure soft partitions. WBEM EventID: 4674. WBEM ProviderName: FPL_IndicationProvider Platform Events 81

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Event Description
Event Severity
Event ID
Unexpected return from an Arches Fabric vertex module function while copying a
cell's graph. Data field: return value from vertex module function. Probable Cause:
Internal firmware error or data corruption. Recommended Action: Capture IPMI
event logs, look for additional errors. Contact your HP Support Representative to
analyze the fabric WBEM EventID: 4528. WBEM ProviderName:
FPL_IndicationProvider
Warning
10622
The checksum update for the PDT has failed. Probable Cause: The call to update the
checksum for the PDT failed. The PDT will most likely be cleared upon reboot.
Recommended Action: Reboot Upgrade SFW Contact HP support WBEM EventID:
4529. WBEM ProviderName: FPL_IndicationProvider
Warning
10623
The checksum in the memory area of NVM is bad. Probable Cause: The checksum
in the memory area of NVM is bad. Recommended Action: Upgrade SFW Contact
HP support WBEM EventID: 4530. WBEM ProviderName: FPL_IndicationProvider
Warning
10625
Checksum calculation failed. Probable Cause: The checksum calculation failed. The
data field contains the address that the checksum calculation was attempted on.
Recommended Action: Upgrade SFW Contact HP support WBEM EventID: 4531.
WBEM ProviderName: FPL_IndicationProvider
Warning
10626
Both SAL's copy and BMC copy of the token specified in the data field is bad. Probable
Cause: Both SAL's copy and BMC copy of the token specified in the data field is bad.
SFW is reinitializing that token to it's default value Recommended Action: Verify
that the default settings are appropriate. For example, run the EFI baud and boot test
command. WBEM EventID: 4532. WBEM ProviderName: FPL_IndicationProvider
Warning
10628
Incompatible I/O Backplane or I/O cables installed. Probable Cause: Incorrect I/O
backplane and/or I/O backplane cables are connected to the cell board. The cell board
is not compatible with I/O backplane and/or I/O backplane cables. Recommended
Action: Remove I/O backplane and/or I/O backplane cables and replace with
compatible I/O backplane and/or I/O backplane cables. WBEM EventID: 4533. WBEM
ProviderName: FPL_IndicationProvider
Error
10629
The fPar identified by the event detail will be unusable. Probable Cause: Firmware
ran out of NVRAM before the server completed cold boot initialization. Recommended
Action: Initialize the NVRAM to the factory defaults and reset the server. Soft
partitions will have to be recreated from scratch before they are available. WBEM
EventID: 4667. WBEM ProviderName: FPL_IndicationProvider
Warning
10698
Firmware is out of NVRAM and cannot built the ILM memory slice device map.
Probable Cause: Firmware ran out of NVRAM before the server completed cold boot
initialization. Recommended Action: Initialize the NVRAM to the factory defaults
and reset the server. Soft partitions will have to be recreated from scratch before they
are available. WBEM EventID: 4671. WBEM ProviderName: FPL_IndicationProvider
Error
10702
The NVRAM for the CPU map is corrupt and cannot be trusted. It appears that there
are more CPUs in the map than the size of the map can hold. Probable Cause: NVRAM
corruption of fPars specific database. Recommended Action: Restore NVRAM to
factory defaults. Reset server and reconfigure soft partitions. WBEM EventID: 4672.
WBEM ProviderName: FPL_IndicationProvider
Error
10703
The NVRAM for the IO device ownership map is corrupt and cannot be trusted. It
appears that there are more IO devices in the map than the size of the map can hold.
Probable Cause: NVRAM corruption of fPars specific database. Recommended Action:
Restore NVRAM to factory defaults. Reset server and reconfigure soft partitions.
WBEM EventID: 4673. WBEM ProviderName: FPL_IndicationProvider
Error
10704
The NVRAM for the cell local memory map is corrupt and cannot be trusted. It
appears that there are more memory slices in the map than the size of the map can
hold. Probable Cause: NVRAM corruption of fPars specific database. Recommended
Action: Restore NVRAM to factory defaults. Reset server and reconfigure soft
partitions. WBEM EventID: 4674. WBEM ProviderName: FPL_IndicationProvider
Error
10705
Platform Events
81