HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 62

Cell failed compatibility checks. Probable Cause: A Cell or CPU module's FRU data

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Event ID Event Severity Event Description 9388 Error Cell failed compatibility checks. Probable Cause: A Cell or CPU module's FRU data is programmed incorrectly. Recommended Action: If this is in manufacturing, re-program the FRU specific field of the FRU data for the cell or CPU module. Otherwise, contact HP Support personnel to troubleshoot the problem. WBEM EventID: 923. WBEM ProviderName: FPL_IndicationProvider 9389 Error PDH space not available after release from reset. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 924. WBEM ProviderName: FPL_IndicationProvider 9390 Error MPON failed to release. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 925. WBEM ProviderName: FPL_IndicationProvider 9391 Error Dillon failed to reset. Probable Cause: Hardware failure. Recommended Action: Fix the hardware, pdh riser or cell. WBEM EventID: 926. WBEM ProviderName: FPL_IndicationProvider 9392 Error DMD clock is not running. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 927. WBEM ProviderName: FPL_IndicationProvider 9394 Error All cpus on the Cell are scheduled to be deconfigured. Probable Cause: All cpus on the cell have been scheduled for deconfiguration. On the next reset, the cell will no longer be operational; system firmware will deconfigure all the cpus and this cell will not be part of a partition. This action is not recommended. To recover, the NVRAM on the PDH card must be cleared, the cell power cycled, and defaults restored from disk. WBEM EventID: 928. WBEM ProviderName: FPL_IndicationProvider 9403 Error A read error occurred while dumping the routing registers. Probable Cause: Fabric Read Error. Recommended Action: Check XBC, CC, links, etc. WBEM EventID: 929. WBEM ProviderName: FPL_IndicationProvider 9412 Error Failed to disable the CC to CC link. Probable Cause: Failure to read or write CC CSRs. Recommended Action: Contact HP Support personnel to check the Check CC. WBEM EventID: 930. WBEM ProviderName: FPL_IndicationProvider 9417 Warning Power has been removed from AC input A0. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 931. WBEM ProviderName: FPL_IndicationProvider 9418 Warning Power has been removed from AC input A1. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 932. WBEM ProviderName: FPL_IndicationProvider 9419 Warning Power has been removed from AC input B0. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 933. WBEM ProviderName: FPL_IndicationProvider 9420 Warning Power has been removed from AC input B1. Probable Cause: A power source has been removed from the chassis. WBEM EventID: 934. WBEM ProviderName: FPL_IndicationProvider 9428 Warning Failed to disable the XIN link during a failed link init. Probable Cause: Have your HP Support Representative check the Coherency Controller WBEM EventID: 935. WBEM ProviderName: FPL_IndicationProvider 9430 Error Error copying the routing registers to the local port. Probable Cause: XBC access failure. Recommended Action: Check XBC, check links, check backplane, check CC. WBEM EventID: 1765. WBEM ProviderName: FPL_IndicationProvider 9431 Warning Error while reading the remote CC's XIN Error Mask register. Probable Cause: CC access failure. Recommended Action: Contact HP Support personnel to check the CC. WBEM EventID: 937. WBEM ProviderName: FPL_IndicationProvider 62 WBEM Provider Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Event Description
Event Severity
Event ID
Cell failed compatibility checks. Probable Cause: A Cell or CPU module's FRU data
is programmed incorrectly. Recommended Action: If this is in manufacturing,
re-program the FRU specific field of the FRU data for the cell or CPU module.
Otherwise, contact HP Support personnel to troubleshoot the problem. WBEM
EventID: 923. WBEM ProviderName: FPL_IndicationProvider
Error
9388
PDH space not available after release from reset. Probable Cause: A hardware fault
has occurred. Recommended Action: Contact HP Support personnel to troubleshoot
the Cell Board, Cell Power Board and PDH Daughtercard. WBEM EventID: 924.
WBEM ProviderName: FPL_IndicationProvider
Error
9389
MPON failed to release. Probable Cause: A hardware fault has occurred.
Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board,
Cell Power Board and PDH Daughtercard. WBEM EventID: 925. WBEM
ProviderName: FPL_IndicationProvider
Error
9390
Dillon failed to reset. Probable Cause: Hardware failure. Recommended Action: Fix
the hardware, pdh riser or cell. WBEM EventID: 926. WBEM ProviderName:
FPL_IndicationProvider
Error
9391
DMD clock is not running. Probable Cause: A hardware fault has occurred.
Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board,
Cell Power Board and PDH Daughtercard. WBEM EventID: 927. WBEM
ProviderName: FPL_IndicationProvider
Error
9392
All cpus on the Cell are scheduled to be deconfigured. Probable Cause: All cpus on
the cell have been scheduled for deconfiguration. On the next reset, the cell will no
longer be operational; system firmware will deconfigure all the cpus and this cell
will not be part of a partition. This action is not recommended. To recover, the
NVRAM on the PDH card must be cleared, the cell power cycled, and defaults
restored from disk. WBEM EventID: 928. WBEM ProviderName:
FPL_IndicationProvider
Error
9394
A read error occurred while dumping the routing registers. Probable Cause: Fabric
Read Error. Recommended Action: Check XBC, CC, links, etc. WBEM EventID: 929.
WBEM ProviderName: FPL_IndicationProvider
Error
9403
Failed to disable the CC to CC link. Probable Cause: Failure to read or write CC CSRs.
Recommended Action: Contact HP Support personnel to check the Check CC. WBEM
EventID: 930. WBEM ProviderName: FPL_IndicationProvider
Error
9412
Power has been removed from AC input A0. Probable Cause: A power source has
been removed from the chassis. WBEM EventID: 931. WBEM ProviderName:
FPL_IndicationProvider
Warning
9417
Power has been removed from AC input A1. Probable Cause: A power source has
been removed from the chassis. WBEM EventID: 932. WBEM ProviderName:
FPL_IndicationProvider
Warning
9418
Power has been removed from AC input B0. Probable Cause: A power source has
been removed from the chassis. WBEM EventID: 933. WBEM ProviderName:
FPL_IndicationProvider
Warning
9419
Power has been removed from AC input B1. Probable Cause: A power source has
been removed from the chassis. WBEM EventID: 934. WBEM ProviderName:
FPL_IndicationProvider
Warning
9420
Failed to disable the XIN link during a failed link init. Probable Cause: Have your
HP Support Representative check the Coherency Controller WBEM EventID: 935.
WBEM ProviderName: FPL_IndicationProvider
Warning
9428
Error copying the routing registers to the local port. Probable Cause: XBC access
failure. Recommended Action: Check XBC, check links, check backplane, check CC.
WBEM EventID: 1765. WBEM ProviderName: FPL_IndicationProvider
Error
9430
Error while reading the remote CC's XIN Error Mask register. Probable Cause: CC
access failure. Recommended Action: Contact HP Support personnel to check the
CC. WBEM EventID: 937. WBEM ProviderName: FPL_IndicationProvider
Warning
9431
62
WBEM Provider Event Tables