HP Integrity Superdome SX1000 HP Insight Manager WBEM Provider Events Referenc - Page 57

Could not initialize the CC to CC link upon boot. Probable Cause: CC CSR Access

Get HP Integrity Superdome SX1000 PDF manuals and user guides View all HP Integrity Superdome SX1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Event ID Event Severity Event Description 8895 Warning Failed to write the CC link disable register. Probable Cause: Fabric Access Failure. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 853. WBEM ProviderName: FPL_IndicationProvider 8896 Warning An unknown backplane type was found. Probable Cause: CSR Read/Write error Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 854. WBEM ProviderName: FPL_IndicationProvider 8897 Warning Error writing the CC link error mask. Probable Cause: Fabric Access Error. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 855. WBEM ProviderName: FPL_IndicationProvider 8898 Warning Failed to read the CC's fabric link error mask. Probable Cause: CC CSR access failure. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 856. WBEM ProviderName: FPL_IndicationProvider 8900 Error Could not initialize the CC to CC link upon boot. Probable Cause: CC CSR Access Failure. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 857. WBEM ProviderName: FPL_IndicationProvider 8906 Warning An Error occurred trying to notify the MP of the attempted reset. Probable Cause: The MP is not functioning or the PDHC cannot communicate with it. Reset the MP. WBEM EventID: 858. WBEM ProviderName: FPL_IndicationProvider 8926 Warning Failed disabling the XIN link for a single cell model. Probable Cause: Fabric Access Error. Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 860. WBEM ProviderName: FPL_IndicationProvider 8930 Error Error while getting the XBC Semaphore. Probable Cause: Most likely a hardware problem, but confirm the cause by looking at the return status. Recommended Action: Check XBC, Backplane, Flex Cables, Contact HP Support Personnel for further troubleshooting. WBEM EventID: 861. WBEM ProviderName: FPL_IndicationProvider 8931 Warning Error releasing the XBC Semaphore. Probable Cause: Fabric Access problem. Either an error reading the hardware or XBC Key contention. Recommended Action: Look for additional chassis codes to provide detail. Check XBC, Backplane, Flex Cables, Contact HP Support Personnel. WBEM EventID: 862. WBEM ProviderName: FPL_IndicationProvider 8936 Warning Unexpected fabric firmware error. Probable Cause: An unanticipated error occurred. Contact HP Support personnel to analyze the IPMI FPL log. WBEM EventID: 864. WBEM ProviderName: FPL_IndicationProvider 8939 Warning The CC's XIN link was found to be already initialized. Probable Cause: Firmware problem. Contact HP Support Personnel. WBEM EventID: 865. WBEM ProviderName: FPL_IndicationProvider 8940 Error Cell has been disabled by the PDHC because no CPU modules were found. Probable Cause: No CPU modules are installed. Recommended Action: Install CPU modules on the Cell. WBEM EventID: 866. WBEM ProviderName: FPL_IndicationProvider 8941 Error Cell has been disabled by PDHC FW because the CPU modules are not compatible. Probable Cause: At least one of the installed CPU modules are incompatible with at least one other CPU module. Recommended Action: Contact HP support personnel to troubleshoot the CPU modules on the Cell. WBEM EventID: 867. WBEM ProviderName: FPL_IndicationProvider 8942 Error Cell has been disabled because of invalid data in a CPU module Scratch EEPROM. Probable Cause: The CPU module is not an HP CPU module, or the FRUID data for this CPU module has not been programmed. Recommended Action: Contact HP support personnel to troubleshoot the CPU module. WBEM EventID: 868. WBEM ProviderName: FPL_IndicationProvider 8954 Warning The Cell Battery voltage level low warning. Probable Cause: The Cell Battery is low. Recommended Action: It needed to be replaced. WBEM EventID: 869. WBEM ProviderName: FPL_IndicationProvider Platform Events 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Event Description
Event Severity
Event ID
Failed to write the CC link disable register. Probable Cause: Fabric Access Failure.
Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM
EventID: 853. WBEM ProviderName: FPL_IndicationProvider
Warning
8895
An unknown backplane type was found. Probable Cause: CSR Read/Write error
Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM
EventID: 854. WBEM ProviderName: FPL_IndicationProvider
Warning
8896
Error writing the CC link error mask. Probable Cause: Fabric Access Error.
Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM
EventID: 855. WBEM ProviderName: FPL_IndicationProvider
Warning
8897
Failed to read the CC's fabric link error mask. Probable Cause: CC CSR access failure.
Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM
EventID: 856. WBEM ProviderName: FPL_IndicationProvider
Warning
8898
Could not initialize the CC to CC link upon boot. Probable Cause: CC CSR Access
Failure. Recommended Action: Contact HP Support personnel to analyze the fabric.
WBEM EventID: 857. WBEM ProviderName: FPL_IndicationProvider
Error
8900
An Error occurred trying to notify the MP of the attempted reset. Probable Cause:
The MP is not functioning or the PDHC cannot communicate with it. Reset the MP.
WBEM EventID: 858. WBEM ProviderName: FPL_IndicationProvider
Warning
8906
Failed disabling the XIN link for a single cell model. Probable Cause: Fabric Access
Error. Recommended Action: Contact HP Support personnel to analyze the fabric.
WBEM EventID: 860. WBEM ProviderName: FPL_IndicationProvider
Warning
8926
Error while getting the XBC Semaphore. Probable Cause: Most likely a hardware
problem, but confirm the cause by looking at the return status. Recommended Action:
Check XBC, Backplane, Flex Cables, Contact HP Support Personnel for further
troubleshooting. WBEM EventID: 861. WBEM ProviderName: FPL_IndicationProvider
Error
8930
Error releasing the XBC Semaphore. Probable Cause: Fabric Access problem. Either
an error reading the hardware or XBC Key contention. Recommended Action: Look
for additional chassis codes to provide detail. Check XBC, Backplane, Flex Cables,
Contact HP Support Personnel. WBEM EventID: 862. WBEM ProviderName:
FPL_IndicationProvider
Warning
8931
Unexpected fabric firmware error. Probable Cause: An unanticipated error occurred.
Contact HP Support personnel to analyze the IPMI FPL log. WBEM EventID: 864.
WBEM ProviderName: FPL_IndicationProvider
Warning
8936
The CC's XIN link was found to be already initialized. Probable Cause: Firmware
problem. Contact HP Support Personnel. WBEM EventID: 865. WBEM ProviderName:
FPL_IndicationProvider
Warning
8939
Cell has been disabled by the PDHC because no CPU modules were found. Probable
Cause: No CPU modules are installed. Recommended Action: Install CPU modules
on the Cell. WBEM EventID: 866. WBEM ProviderName: FPL_IndicationProvider
Error
8940
Cell has been disabled by PDHC FW because the CPU modules are not compatible.
Probable Cause: At least one of the installed CPU modules are incompatible with at
least one other CPU module. Recommended Action: Contact HP support personnel
to troubleshoot the CPU modules on the Cell. WBEM EventID: 867. WBEM
ProviderName: FPL_IndicationProvider
Error
8941
Cell has been disabled because of invalid data in a CPU module Scratch EEPROM.
Probable Cause: The CPU module is not an HP CPU module, or the FRUID data for
this CPU module has not been programmed. Recommended Action: Contact HP
support personnel to troubleshoot the CPU module. WBEM EventID: 868. WBEM
ProviderName: FPL_IndicationProvider
Error
8942
The Cell Battery voltage level low warning. Probable Cause: The Cell Battery is low.
Recommended Action: It needed to be replaced. WBEM EventID: 869. WBEM
ProviderName: FPL_IndicationProvider
Warning
8954
Platform Events
57