HP J5780 User Guide - Macintosh - Page 236
To copy an overexposed photo, To adjust the copy contrast from the control panel
UPC - 882780940253
View all HP J5780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Chapter 11 Solution: Adjust the lightness and darkness of the copies. To adjust the copy contrast from the control panel 1. Make sure you have paper loaded in the input tray. 2. Load your original print side down on the right front corner of the glass or print side up in the document feeder tray. If you use the document feeder tray, place the pages so that the top edge of the document goes in first. 3. In the Copy area, press Menu repeatedly until Lighter / Darker appears. 4. Do one of the following: • Press to darken the copy. • Press to lighten the copy. 5. Press Start Copy Black or Start Copy Color. Cause: Try using Enhancements improve an overexposed image. Solution: To copy an overexposed photo 1. Make sure you have paper loaded in the input tray. 2. Load your original photo print side down on the right front corner of the glass. Position the photo on the glass so the long edge of the photo is along the front edge of the glass. 3. In the Copy area, press Menu repeatedly until Enhancements appears. 4. Press until the Photo enhancement setting appears. 5. Press Start Copy Color. Nothing happens when I try to copy Cause: The HP All-in-One is turned off. Solution: Look on the HP All-in-One control panel to see if the display is blank, and the Power button is not lit. If these two conditions exist, the HP All-in-One is turned off. Make sure the power cord is connected and plugged into a power outlet. Press the Power button to turn on the HP All-in-One. Cause: The original is placed incorrectly on the glass or in the document feeder tray. 234 Troubleshooting