HP LH4r HP Netserver LH 3 NetRAID-3Si Installation Guide - Page 7

RAID level Logical disks Configuration options: Cabinet RAID arrays 1, 5, 10, 50 1 per RAID array 8 maximum per NetRAID adapter Cluster mode on Cache write-policy to Write thru Set bus speed for Rack Storage/8 to Ultra Set any other options as you prefer A RAID array (logical disk) must be composed of all the same disk model (i.e., part number and suffix). Different size or speed disks are not allowed in the same RAID array. Any combination of disk models is allowed on a SCSI channel and in a cluster. Number and mix of cabinets Rack Storage/12: Model Disk drives: Cables Rack Storage/8: Model Disk drives: Cables 1 - 3, any mix of RackStorage/12s and Rack Storage/8s. D5989A and 1 D6025A for each Rack Storage/12 (350-450 MHz, Nova 1) D5989B and 1 D6025B for each Rack Storage/12 (400-450 MHz, Nova 2) HP 4.2 GB Ultra SCSI Disk Module D6104A HP 9.1 GB Ultra SCSI Disk Module D6106A HP 9.1 GB (10k rpm) Ultra SCSI Disk Module D6107A HP 18.2 GB Ultra SCSI Disk Module D6108A HP 18.2 GB (7200 rpm) Low Profile Ultra SCSI Disk Module D7174A HP 36.4 GB (10k rpm) Ultra SCSI Disk Module D8210A Any 2 HP LVD SCSI cables from the following list: 1 meter D7131A 2.5 meter D6020A 5 meter D6982A 10 meter D6983A D4902A HP 4.2 GB Ultra SCSI Disk Module D3583C HP 4.2 GB (10k rpm) Ultra SCSI Disk Module D4903A HP 9.1 GB Ultra SCSI Disk Module D4289A HP 9.1 GB (10k rpm) Ultra SCSI Disk Module D6019A HP 18.2 GB Ultra SCSI Disk Module D5039A NOTE All disks in a Rack Storage/8 must be the same speed. HP D5957A Cluster Adapter (2 required per HP Rack Storage/8) NOTE If both channels 0 and 2 of the NetRAID Adapter are used, then cable D7131A must be used with Cluster Adapter D5957A on both channels. 3