HP LaserJet 9000 Service Manual - Page 207
Jam Inside, Left Door, For Help Press, 0a.00 Jam Inside, 0a.00, 0a.00 Jam In, Top Output Bin,
View all HP LaserJet 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
Table 21. Numeric error messages (continued) Control panel message Event-log Description error message Recommended action 13.09.00 JAM INSIDE 13.09.00 LEFT DOOR For help press 13.0A.00 JAM INSIDE 13.0A.00 LEFT DOOR For help press 13.0A.00 JAM IN TOP OUTPUT BIN For help press 13.0A.00 13.10.00 JAM INSIDE 13.10.00 DUPLEXER DOOR For help press 13.10.00 JAM INSIDE 13.10.00 LEFT DOOR For help press z A page is jammed in the paper 1 path at the face-down bin. z The leading edge of the media 2 did not reach the face-down bin delivery sensor (PS1451) within the specified time. 3 4 5 6 7 z A page is jammed in the paper 1 path. Access through the left door. 2 z The trailing edge of the media did not leave the face-down bin delivery sensor (PS1451) within the specified time. 3 4 z A page is jammed in the paper 1 path at the face-down bin. z The trailing edge of the media 2 did not leave the face-down bin delivery sensor (PS1451) within the specified time. 3 4 z A page is jammed in the paper 1 path at the reversing area. z The leading edge of the media 2 did not reach the reversed paper sensor (PS2002) in the duplexer within the specified time. 3 4 z A page is jammed in the paper 1 path at the reversing area. z The leading edge of the media 2 did not reach the reversed paper sensor (PS2002) in the duplexer within the specified time. 3 4 Clear the jam in the indicated area. Close the door so that the printer attempts to clear the paper path. Reseat the connections to the DC controller. Make sure the delivery flags move smoothly. Perform a service test. See page 213. If the error persists, replace the delivery unit. Replace the DC controller. Clear the jam in the indicated area. Close the door so that the printer attempts to clear the paper path. If the error persists, replace the delivery unit. Replace the diverter. Clear the jam in the indicated area. Close the door so that the printer attempts to clear the paper path. If the error persists, replace the delivery unit. Replace the diverter. Clear the jam in the indicated area. Close the door so that the printer attempts to clear the paper path. Reseat the connections to the DC controller. If the error persists, replace the duplexer. Clear the jam in the indicated area. Close the door so that the printer attempts to clear the paper path. Reseat the connections to the DC controller. If the error persists, replace the duplexer. Control-panel messages 191