HP LaserJet 9000 Service Manual - Page 224
PRINTER ERROR, For help press, To continue, cycle power, INPUT, DEVICE FAILURE, Reseat the DIMM.
View all HP LaserJet 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
Table 21. Numeric error messages (continued) Control panel message Event-log Description error message Recommended action 60.X PRINTER ERROR For help press 60.X Tray X is lifting the media to the top 1 of the tray for correct feeding, but something is preventing the lift 2 process. 3 2 Error in tray 2 4 3 Error in tray 3 5 6 7 Open tray X. Check tray X for obstructions. Remove and reseat tray X. Perform a service test. See page 213. Switch tray X with the other tray. If the error changes, the tray might be defective. If the error persists, replace the paper input unit. 62.X PRINTER ERROR To continue cycle power 62.X A printer error occurred, and X 1 corresponds to the following issue: 1 memory in DIMM slot 1 2 memory in DIMM slot 2 2 3 memory in DIMM slot 3 4 memory in DIMM slot 4 3 4 Turn off the printer, and then turn the printer on to continue. Reseat the DIMM. Move the DIMM to a different slot. Replace the DIMM. 64 PRINTER ERROR For help press alternates with To continue cycle power 66.11.00 INPUT DEVICE FAILURE For help press 64 66.11.00 A scan buffer error occurred. z A failure in an external input device occurred. z A lifting operation is not completed in the correct amount of time. 1 Turn off the printer, and then turn the printer on to continue. 2 Update the firmware to the latest version. 3 Reseat connections to the laser/scanner and DC controller. 4 If the error persists, replace the laser/scanner. 5 Replace the DC controller. 6 Make sure that the side of the tray is empty. 1 Make sure that the tray on the left side of the lift deck is empty. 2 Make sure that the paperpath connection unit is installed in the right side of the engine. 3 Check the connections. 4 Turn off the printer, and then turn the printer on to continue. 5 Send two pages through for a paper-path test. 6 Reseat the input device. 7 Replace the input device. 208 Chapter 7 Troubleshooting