HP LaserJet Enterprise M806 User Guide 1 - Page 49
Enterprise M806 and HP LaserJet Enterprise flow MFP M830, away from the product.
View all HP LaserJet Enterprise M806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
1. Turn off the product, and then disconnect the power cord. CAUTION: Turn the product off, wait five seconds, and then remove the power cord before attempting to service the product. 2. At the back of the product, disconnect the finishing accessory interface cable. 3. Open the finishing accessory front cover. Release and hold the bottom handle first, and then release and hold the top handle. Hold both handles at the same time, and then slide the finishing accessory away from the product. CAUTION: Failure to follow these instructions might damage the product. 4. Completely remove the finishing accessory. ENWW Install or replace a stapler/stacker or stapler/stacker with hole punch accessory for the HP LaserJet 41 Enterprise M806 and HP LaserJet Enterprise flow MFP M830