HP LaserJet Enterprise M806 User Guide 1 - Page 77
Step four: Parts return
View all HP LaserJet Enterprise M806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2. Attach the accessory to the product. 3. Use the adjustment wheels on the accessory to align the accessory with the edge of the product. NOTE: If the accessory is not correctly aligned with the product, excessive paper jams may occur. 4. Connect the finishing accessory interface cable. 5. Connect the product power cord, and then turn on the product. Step four: Parts return The following URL provides information on how to return parts to HP for reuse and recycling: Product return and recycling NOTE: HP recommends responsible disposal of the defective booklet maker. ENWW Install or replace the booklet maker or booklet maker hole punch accessory for the HP Color LaserJet 69 Enterprise M855 and HP Color LaserJet Enterprise flow MFP M880
2.
Attach the accessory to the product.
3.
Use the adjustment wheels on the accessory to align the accessory with the edge of the product.
NOTE:
If the accessory is not correctly aligned with the product, excessive paper jams may occur.
4.
Connect the finishing accessory interface cable.
5.
Connect the product power cord, and then turn on the product.
Step four: Parts return
The following URL provides information on how to return parts to HP for reuse and recycling:
Product return
and recycling
NOTE:
HP recommends responsible disposal of the defective booklet maker.
ENWW
Install or replace the booklet maker or booklet maker hole punch accessory for the HP Color LaserJet
Enterprise M855 and HP Color LaserJet Enterprise flow MFP M880
69