HP LaserJet Pro MFP 4101-4104dw User Guide - Page 72
Method two: Set up the Scan to Network Folder feature via the HP Embedded Web, Server
![]() |
View all HP LaserJet Pro MFP 4101-4104dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
d. From the Quality Settings drop-down, select the default resolution for scanned files. NOTE: Higher resolution images have more dots per inch (dpi), so they show more detail. Lower resolution images have fewer dots per inch and show less detail, but the file size is smaller. e. In the Filename Prefix field, enter a file name prefix (e.g., MyScan). 10. On the 4. Finish page, review the information and verify all the settings are correct. If there is an error, click the Back button to correct the error. If the settings are correct, click the Save and Test button to test the configuration. 11. When the Congratulations message displays, click Finish to complete the configuration. 12. The Network Folder Profiles dialog now shows the newly added sender email profile. Click Close to exit the wizard. Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server Use the HP Embedded Web Server (EWS) to set up the Scan to Network Folder feature. This method is available for all supported operating systems. Step one: Access the HP Embedded Web Server (EWS) Locate the printer's IP address and then enter it into a Web browser to access the EWS. Your printer must be connected to an IP-based network before you can access the EWS. 1. From the Home screen on the printer control panel, touch the Wireless icon or the Ethernet icon to view the printer's IP address or host name. 2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens. NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer. Step two: Configure the Scan to Network Folder feature Use the Embedded Web Server (EWS) interface to set up the Scan to Folder feature. 1. On the Settings tab in the EWS, click Control Panel Customization, and then click Quick Sets. 2. Click (Add), for Type select Scan to Network Folder, and follow the onscreen instructions for adding a Quick Set profile for a network folder. When finished, click Next. 3. In this page, follow the onscreen instructions for setting up the network folder, authentication requirements, and scan and file configurations. When finished, click Apply. Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server 61
![](/manual_guide/products/hewlettpackard-laserjet-pro-mfp-41014104dw-user-guide-62a0e49/72.png)