HP LaserJet Pro MFP 4101-4104dw User Guide - Page 93

Link speed and duplex settings, Printer security features, Introduction

Page 93 highlights

● Default Gateway 6. Touch Apply to save the settings. Link speed and duplex settings The link speed and communication mode of the print server must match the network hub. For most situations, leave the printer in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the printer from communicating with other network devices. If you need to make changes, use the printer control panel. NOTE: This information applies only to Ethernet (wired) networks. It does not apply to wireless networks. NOTE: The printer setting must match the setting for the network device (a network hub, switch, gateway, router, or computer). NOTE: Making changes to these settings causes the printer to turn off and then on. Make changes only when the printer is idle. 1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon Setup icon . 2. Touch Network Setup. 3. Touch Ethernet Settings, and then touch Link Speed. 4. Select one of the following options: Setting Description Automatic The print server automatically configures itself for the highest link speed and communication mode allowed on the network. 10T Full 10 Mbps, full-duplex operation 10T Half 10 Mbps, half-duplex operation 100TX Full 100 Mbps, full-duplex operation 100TX Half 100 Mbps, half-duplex operation 1000T Full 1000 Mbps, full-duplex operation After making a change to the setting, the printer turns off and then on. Printer security features Review the following information about the printer security features. Introduction The printer includes several security features to restrict who has access to configuration settings, to secure data, and to prevent access to valuable hardware components. 82 Chapter 8 Manage the printer

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204

Default Gateway
6.
Touch
Apply
to save the settings.
Link speed and duplex settings
The link speed and communication mode of the print server must match the network hub. For most situations,
leave the printer in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the
printer from communicating with other network devices. If you need to make changes, use the printer control
panel.
NOTE:
This information applies only to Ethernet (wired) networks. It does not apply to wireless networks.
NOTE:
The printer setting must match the setting for the network device (a network hub, switch, gateway,
router, or computer).
NOTE:
Making changes to these settings causes the printer to turn off and then on. Make changes only when
the printer is idle.
1.
From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to
open the Dashboard, and then touch the Setup icon Setup icon
.
2.
Touch
Network Setup
.
3.
Touch
Ethernet Settings
, and then touch
Link Speed
.
4.
Select one of the following options:
Setting
Description
Automatic
The print server automatically configures itself for the highest link speed and communication mode
allowed on the network.
10T Full
10 Mbps, full-duplex operation
10T Half
10 Mbps, half-duplex operation
100TX Full
100 Mbps, full-duplex operation
100TX Half
100 Mbps, half-duplex operation
1000T Full
1000 Mbps, full-duplex operation
After making a change to the setting, the printer turns off and then on.
Printer security features
Review the following information about the printer security features.
Introduction
The printer includes several security features to restrict who has access to configuration settings, to secure data,
and to prevent access to valuable hardware components.
82
Chapter 8
Manage the printer