HP M5035x HP LaserJet M5025/M5035 MFP - User Guide - Page 177
Calibrate the scanner, Calibrating
UPC - 882780574830
View all HP M5035x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Calibrate the scanner Calibrate the scanner to compensate for offsets in the scanner imaging system (carriage head) for ADF and flatbed scans. Because of mechanical tolerances, the scanner's carriage head might not read the position of the image accurately. During the calibration procedure, scanner offset values are calculated and stored. The offset values are then used when producing scans so that the correct portion of the document is captured. Scanner calibration should be carried out only if you notice offset problems with the scanned images. The scanner is calibrated before it leaves the factory. It needs to be calibrated again only rarely. 1. From the Home screen, touch Administration. 2. Touch Troubleshooting. 3. Touch Calibrate Scanner and then follow the instructions in the onscreen dialog box. The device starts the calibration process, and Calibrating appears on the touchscreen status line until the process is complete. ENWW Calibrate the scanner 165