HP M5035x HP LaserJet M5025/M5035 MFP - User Guide - Page 78
Media and trays, Media type, Considerations
UPC - 882780574830
View all HP M5035x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Table 4-1 Media considerations (continued) Media type Considerations To avoid problems when using preprinted forms, embossed paper, and letterhead, observe the following guidelines: ● Use preprinted forms and letterhead paper that have been printed by offset lithography or engraving. ● When the form is preprinted, be careful not to change the moisture content of the paper, and do not use materials that change the paper's electrical or handling properties. Seal the forms in moisture-proof wrap to prevent moisture changes during storage. NOTE To print a single-page cover letter on letterhead, followed by a multiple-page document, feed the letterhead face up in tray 1, and load the standard paper into one of the other trays. The device automatically prints from tray 1 first. Vellum Vellum is special lightweight paper similar to parchment. ● Print vellum from tray 1 only. ● Do not print on both sides of vellum. NOTE From the printer driver, set the type of paper for tray 1 to vellum or light, and select the media by type. Colored paper HP LaserJet Tough paper Recycled paper Colored paper should be of the same high quality as white xerographic paper. ● Use only HP LaserJet Tough paper. HP products are designed to work together for optimum printing results. ● Handle HP LaserJet Tough paper by the edges. Oils from your fingers can cause print-quality problems. This device supports recycled paper. Recycled paper must meet the same specifications as standard paper. See the HP LaserJet Printer Family Print Media Guide. Hewlett-Packard recommends that recycled paper contain no more than 5% ground wood. 66 Chapter 4 Media and trays ENWW