HP M5035x HP LaserJet M5025/M5035 MFP - User Guide - Page 227
Misformed characters, skew, Operating, environment, media into the input trays, Media, and trays
UPC - 882780574830
View all HP M5035x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Misformed characters AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc 1. Print a few more pages to see if the problem corrects itself. 2. Make sure that the environmental specifications for the device are being met. See Operating environment. Page skew 1. Print a few more pages to see if the problem corrects itself. 2. Verify that no torn pieces of media are inside the device. 3. Make sure that media is loaded correctly and that all adjustments have been made. See Load media into the input trays. Make sure that the guides in the tray are not too tight or too loose against the media. 4. Turn over the stack in the tray. Also, try rotating the stack 180°. 5. Make sure that the type and quality of the media you are using meet HP specifications. See Media and trays. 6. Make sure that the environmental specifications for the device are being met. (See Operating environment.) 7. Perform a tray alignment by opening the Administration menu at the device control panel. On the Print Quality submenu, touch Set Registration. Choose a tray under Source and then run a test page. For more information, see Print Quality menu. ENWW Solve print-quality problems 215