HP M5035x HP LaserJet M5025/M5035 MFP - User Guide - Page 183
Symptom, Check, Possible causes, Possible solutions, HP Customer Care. See
UPC - 882780574830
View all HP M5035x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Symptom Stapling problems Check Possible causes Possible solutions Can you print over the network? The network might not be configured correctly. 1. Try connecting the computer directly to the device. If you can print, the problem is with the network configuration. See Solve network printing problems. 2. If the problem persists, contact HP Customer Care. See HP Customer Care. Are you having problems printing from specific software programs? The problem might be with the software 1. program. Try printing from a different software program. If you can print, the problem is with the original software program. 2. See the documentation for the software program. Are jobs stapled? The staple cassette might be jammed. 1. Remove the staple cassette and check if it is jammed or empty. The staple cassette might need to be See Clear staple jams. replaced. 2. For copy jobs, select the Staple/ The job might not be configured for Collate option at the control panel. stapling. For print jobs, make sure the You might be using a paper size that is stapler/stacker is configured in the not supported for stapling. printer driver. 3. Use only Letter- or A4-size paper for staple jobs. 4. If the problem persists, contact HP Customer Care. See HP Customer Care. Are the staples holding the pages together? You might be using staples that are not 1. Replace the staple cartridge with a made for this device. staple cartridge that is made for this device. See Order parts, The job might have too many pages for accessories, and supplies. stapling. 2. The stapler supports jobs that have 30 or fewer pages, or a 3 mm stack height. 3. If the problem persists, contact HP Customer Care. See HP Customer Care. Are the staples in the correct location? You might need to change the page orientation for the job. 1. For print jobs, adjust the page layout in the software program. 2. For copy jobs, load the document into the ADF with the long-edge feeding first. See Load media into the input trays. 3. If the problem persists, contact HP Customer Care. See HP Customer Care. ENWW Problem-solving flowchart 171