HP Model 744 HP Model 744 Owner's Guide - Page 140
If the power-on selftest detects a defective or damaged memory card, using
View all HP Model 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
A-24 The Boot Console Interface Displaying the Current Memory Configuration The following listing is a sample memory configuration table when memory modules are properly installed and configured: MEMORY INFORMATION MEMORY STATUS TABLE Slot Size Status 0 64MB Configured 1 32MB Configured 2 64MB Configured --------- TOTAL 160MB If the power-on selftest detects a defective or damaged memory card, using the memory command (from the Information Menu prompt) displays the following information: WARNING: One or more memory banks were not configured due to errors in the following SIMM(s). Physical Slot 3 Error Type ----------SIMM hardware error Memory Card Stack Slot 3 | Failed | Slot 2 | 64MB OK | Slot 1 | 32MB OK | Slot 0 | 64MB OK | Side view of Model 9000/744/165L Single Board Computer PCB. SUGGESTION: If possible, turn off the computer and check to see if the memory card(s) are seated properly. Memory HVERSION 0x0740 SVERSION 0x0900