HP Model 744 HP Model 744 Owner's Guide - Page 86
Connecting a Monitor to HCRX, GSC, or On-Board Video Connector
View all HP Model 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
CAUTION: Connecting Cables Connecting a Single Monitor, Multi-Display System, or Text-Only Terminal Some CRT-based monitors are heavy. Use caution when lifting and unpacking the monitor. HCRX Graphics Connector On-Board Graphics Connector Figure 4-2 4-6 GSC 3 x 5 Graphics Connector Note: On-board and HCRX connectors require conversion cable. Connecting a Monitor to HCRX, GSC, or On-Board Video Connector 1 On-board graphics and HCRX board: a Plug the small connector of the conversion video cable into the video connector of your board computer, or the connector on your HCRX board. b Connect the monitor cable to the conversion cable. c Connect the monitor cable to your monitor as follows: • Red to R (RED) • Green to G (GREEN) • Blue to B (BLUE) 2 GSC graphics cards: a Connect the monitor cable to the GSC card connector. b Connect the other end of the cable to the monitor as specified in the previous step.