HP Model 744 HP Model 744 Owner's Guide - Page 60
Installing the Expansion Adapter onto the Bridge Adapter
View all HP Model 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Installing Accessories PMC Bridge Adapter and Expansion Adapter 11 Screw the four threaded standoffs into the bridge adapter's VME connectors. 12 Making sure that the connector and bezels are properly aligned, install the PMC expansion adapter onto the bridge adapter, as shown in Figure 2-10. Ensure that the interboard connector seats properly by applying pressure to the top of the expansion board and to the bottom of the bridge board. You may have to remove memory cards to access the underside of the bridge board. There are two screws that secure the front bezel, four standoffs between the VME connectors, and four screws to secure the VME connectors. Expansion Adapter with 2 PMC Cards Installed Connector Screws (4) Interboard Connector Standoffs (4) Front Bezel Screws (2) Bridge Adapter Figure 2-10 2-20 Installing the Expansion Adapter onto the Bridge Adapter