HP Model 744 HP Model 744 Owner's Guide - Page 64
Installing the Board Computer with PMC into VME Card Cage - 24
View all HP Model 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
CAUTION: Installing Accessories PMC Bridge Adapter and Expansion Adapter 14 Remove the VME slot cover plate(s) from the VME card cage, as required to open the slots the new assembly will occupy. 15 Insert the Model 744 with the attached PMC adapter(s) into card cage slots until the they seat properly and the front panels are flush against the card cage. Do not tighten any captive screws until you have started to thread each captive screw into its hole. 16 Engage all captive screws before tightening each screw of the board computer/PMC assembly. See Figure 2-14 Captive Screws Ejector Handles Figure 2-14 2-24 Installing the Board Computer with PMC into VME Card Cage
2-24
Installing Accessories
PMC Bridge Adapter and Expansion Adapter
14
Remove the VME slot cover plate(s) from the VME card cage, as required
to open the slots the new assembly will occupy.
15
Insert the Model 744 with the attached PMC adapter(s) into card cage
slots until the they seat properly and the front panels are flush against the
card cage.
CAUTION:
Do not tighten any captive screws until you have started to thread
each
captive
screw into its hole.
16
Engage all captive screws before tightening each screw of the board com-
puter/PMC assembly. See Figure 2-14
Figure 2-14
Installing the Board Computer with PMC into VME Card Cage
Captive Screws
Ejector Handles