HP NetServer LXr Pro8 HP Netserver Mass Storage Upgrade Guide - Page 13

Step 4, Install Mass Storage Cage

Get HP NetServer LXr Pro8 PDF manuals and user guides View all HP NetServer LXr Pro8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Chapter 2 Installation 2. Remove Cover 1 as described in your HP NetServer installation guide. 3. The HP NetServer has a cover plate on its chassis front over the expansion bay in which you will install the mass storage cage. Unscrew its six retaining screws, as shown in Figure 2-1, and remove the cover plate. Figure 2-1. Remove Cover Plate Store the cover plate and screws for future use, in case you ever remove the second mass storage cage. Step 4: Install Mass Storage Cage NOTE The secondary mass storage cage is shipped with filler panels installed. Leave the filler panels in place while you install the cage. Do not install hard disk drives before you install the cage. If you are installing a hot-swap mass storage cage that already contains hard disk drives, remove them before you install the cage. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Chapter 2
Installation
9
2.
Remove Cover 1 as described in your HP NetServer installation guide.
3.
The HP NetServer has a cover plate on its chassis front over the expansion
bay in which you will install the mass storage cage. Unscrew its six
retaining screws, as shown in Figure 2-1, and remove the cover plate.
Figure 2-1. Remove Cover Plate
Store the cover plate and screws for future use, in case you ever remove the
second mass storage cage.
Step 4:
Install Mass Storage Cage
NOTE
The secondary mass storage cage is shipped with filler panels
installed. Leave the filler panels in place while you install the
cage. Do not install hard disk drives before you install the cage.
If you are installing a hot-swap mass storage cage that already
contains hard disk drives, remove them before you install the
cage.