HP NetServer LXr Pro8 HP Netserver Mass Storage Upgrade Guide - Page 7

Precautions

Get HP NetServer LXr Pro8 PDF manuals and user guides View all HP NetServer LXr Pro8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Chapter 1 Introduction Precautions Follow the procedures listed below to ensure safe handling of components and to prevent harm to both you and the HP NetServer: WARNING Hazardous voltages and high energy levels are present inside the HP NetServer. ALWAYS disconnect the AC power cord(s) from the NetServer before removing the cover. Serious injury may result if this warning is not observed. WARNING To prevent the rack from tipping over, extend the anti-tip foot or attach the anti-tip feature before extending the HP NetServer from the rack. Also lower the leveler feet of the rack to improve stability and to prevent the rack from rolling. Failure to use the anti-tip foot or feature and the leveler feet could result in serious injury. CAUTION This accessory is sensitive to static electricity and can easily be damaged by improper handling. Use of a grounding strap is recommended. Read the following information carefully before you handle the accessory: • Leave the accessory in the anti-static container until you are ready to install it. • Use an anti-static service kit, such as 3M® 8501/8502/8505 or equivalent. • Before you remove the accessory from the anti-static container, touch a grounded, unpainted metal surface on the system to discharge static electricity. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Chapter 1
Introduction
3
Precautions
Follow the procedures listed below to ensure safe handling of components and to
prevent harm to both you and the HP NetServer:
WARNING
Hazardous voltages and high energy levels are present inside
the HP NetServer. ALWAYS disconnect the AC power
cord(s) from the NetServer before removing the cover.
Serious injury may result if this warning is not observed.
WARNING
To prevent the rack from tipping over, extend the anti-tip foot
or attach the anti-tip feature before extending the
HP NetServer from the rack. Also lower the leveler feet of the
rack to improve stability and to prevent the rack from rolling.
Failure to use the anti-tip foot or feature and the leveler feet
could result in serious injury.
CAUTION
This accessory is sensitive to static electricity and can easily
be damaged by improper handling. Use of a grounding strap is
recommended. Read the following information carefully
before you handle the accessory:
•
Leave the accessory in the anti-static container until you
are ready to install it.
•
Use an anti-static service kit, such as 3M
®
8501/8502/8505
or equivalent.
•
Before you remove the accessory from the anti-static
container, touch a grounded, unpainted metal surface on
the system to discharge static electricity.