HP OMEN 15-5000 Maintenance and Service Guide - Page 36

Solid-state drive (M.2

Get HP OMEN 15-5000 PDF manuals and user guides View all HP OMEN 15-5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Solid-state drive (M.2) Description 128 GB solid-state drive (SSD), M.2, TLC, 2280 DS, SATA 256 GB solid-state drive (SSD), M.2, MLC, 2260 DS,PCIe 256 GB solid-state drive (SSD), M.2, TLC, SATA 512 GB solid-state drive (SSD), M.2, MLC, 2280 DS, PCIe Spare part number 788611001 788612-001 819489-001 788613-001 Before removing the solid-state drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 25). 5. Disconnect the battery (see Disconnecting the battery on page 27). Remove the solid-state drive: 1. Remove the Phillips PM2.0×3.5 screw (1) that secures the solid-state drive to the system board. 2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the solid-state drive. 30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Solid-state drive (M.2)
Description
Spare part number
128 GB solid-state drive (SSD), M.2, TLC, 2280 DS, SATA
788611001
256 GB solid-state drive (SSD), M.2, MLC, 2260 DS,PCIe
788612-001
256 GB solid-state drive (SSD), M.2, TLC, SATA
819489-001
512 GB solid-state drive (SSD), M.2, MLC, 2280 DS, PCIe
788613-001
Before removing the solid-state drive, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
25
).
5.
Disconnect the battery (see
Disconnecting the battery
on page
27
).
Remove the solid-state drive:
1.
Remove the Phillips PM2.0×3.5 screw
(1)
that secures the solid-state drive to the system board.
2.
Remove the solid-state drive
(2)
by pulling the drive away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
30
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts