HP OMEN 15-ax000 OMEN by Laptop PC Maintenance and Service Guide - Page 51

SSD (M.2), Remove the SSD

Get HP OMEN 15-ax000 PDF manuals and user guides View all HP OMEN 15-ax000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

SSD (M.2) Description Generic SSD 128 GB 2280 M2 SATA-3 Value TL Generic SSD 256 GB 2280 M2 PCIe 3x4SS NVMe TLC TL Generic SSD 512 GB 2280 M2 PCIe3x4SS NVMe TLC TL, not for products with AMD Radeon hybrid graphics Spare part number 827560-027 847109-008 847110-007 Before removing the SSD, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the base enclosure (see Base enclosure on page 32). 5. Disconnect the battery (see Battery on page 34). Remove the SSD: 1. Remove the Phillips M2.0 x 2.5 screw (1) that secures the SSD to the system board. 2. Remove the SSD (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the SSD. Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
SSD (M.2)
Description
Spare part number
Generic SSD 128 GB 2280 M2 SATA-3 Value TL
827560-027
Generic SSD 256 GB 2280 M2 PCIe 3x4SS NVMe TLC TL
847109-008
Generic SSD 512 GB 2280 M2 PCIe3x4SS NVMe TLC TL, not for products with AMD Radeon hybrid
graphics
847110-007
Before removing the SSD, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the base enclosure (see
Base enclosure
on page
32
).
5.
Disconnect the battery (see
Battery
on page
34
).
Remove the SSD:
1.
Remove the Phillips M2.0 x 2.5 screw
(1)
that secures the SSD to the system board.
2.
Remove the SSD
(2)
by pulling the drive away from the slot at an angle.
Reverse this procedure to install the SSD.
Component replacement procedures
41