HP OMEN 15-ax000 OMEN by Laptop PC Maintenance and Service Guide - Page 59
Heat sink for hybrid graphics memory, Remove the 6 Phillips M2.0 screws
View all HP OMEN 15-ax000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Heat sink for hybrid graphics memory Description Heat sink for products with NVIDIA GeForce GTX 950M/960M/965M hybrid graphics Heat sink for products with AMD Radeon hybrid graphics Heat sink for products with NVIDIA GeForce GTX 1050/1050Ti hybrid graphics Spare part number 856668-001 901922-001 920563-001 Before removing the heat sink for hybrid graphics memory, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the base enclosure (see Base enclosure on page 32). 5. Disconnect the battery (see Battery on page 34). Remove the heat sink for hybrid graphics memory: 1. Remove the 6 Phillips M2.0 screws (1) securing the heat sink. 2. Carefully lift the heat sink (2) to remove it from the system board. Component replacement procedures 49