HP OMEN 15-ax000 OMEN by Laptop PC Maintenance and Service Guide - Page 66
Power connector
View all HP OMEN 15-ax000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
1. Carefully place the system board face down. 2. Insert a thin plastic tool (1) to lift the RTC battery, and then remove the battery (2). Reverse this procedure to install the RTC battery. Power connector Description Power connector (includes cable) Spare part number 858021-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the power connector, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 32). 5. Remove the battery (see Battery on page 34), and then remove the following components: a. Hard drive (see Hard drive on page 39). b. SSD (see SSD (M.2) on page 41). c. Fans (see Fans on page 48). d. System board (see System board on page 53). 56 Chapter 5 Removal and replacement procedures for authorized service provider parts