HP OMEN 15-ax000 OMEN by Laptop PC Maintenance and Service Guide - Page 55

USB board

Get HP OMEN 15-ax000 PDF manuals and user guides View all HP OMEN 15-ax000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Reverse this procedure to install the WLAN module. USB board Description USB board USB board cable Spare part number 858975-001 856729-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the USB board, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 32). 5. Disconnect the battery (see Battery on page 34). Remove the USB board: ▲ Disconnect the zero-insertion force (ZIF) connector (1), remove the USB board cable (2), disconnect 2 zero-insertion force (ZIF) connectors (3) and (4), remove 1 Phillips screw (5), and then lift the USB board to remove it (6). Component replacement procedures 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Reverse this procedure to install the WLAN module.
USB board
Description
Spare part number
USB board
858975-001
USB board cable
856729-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the USB board, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
Base enclosure
on page
32
).
5.
Disconnect the battery (see
Battery
on page
34
).
Remove the USB board:
▲
Disconnect the zero-insertion force (ZIF) connector
(1)
, remove the USB board cable
(2)
, disconnect 2
zero-insertion force (ZIF) connectors
(3)
and
(4)
, remove 1 Phillips screw
(5)
, and then lift the USB board
to remove it
(6)
.
Component replacement procedures
45