HP OMEN 15-ax000 OMEN by Laptop PC Maintenance and Service Guide - Page 64

Disconnect the following cables and zero-insertion force ZIF connectors from the system board

Get HP OMEN 15-ax000 PDF manuals and user guides View all HP OMEN 15-ax000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

4. Remove the base enclosure (see Base enclosure on page 32). 5. Remove the battery (see Battery on page 34), and then remove the following components: a. Hard drive (see Hard drive on page 39). b. SSD (see SSD (M.2) on page 41). c. Fans (see Fans on page 48). NOTE: When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Heat sink for hybrid graphics (see Heat sink for hybrid graphics memory on page 49). ● Heat sink for CPU and graphics (see Heat sink for CPU and graphics on page 50). ● WLAN module (see WLAN module on page 44) ● Memory module (see Memory on page 42) ● RTC battery (see RTC battery on page 55) Remove the system board: 1. Disconnect the following cables and zero-insertion force (ZIF) connectors from the system board: ● Wireless antenna cable (1) ● Speaker cable (2) ● Keyboard cable (3) ● Display cable (4) ● USB board cable (5) ● TouchPad cable (6) ● Memory cable (7) 54 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
4.
Remove the base enclosure (see
Base enclosure
on page
32
).
5.
Remove the battery (see
Battery
on page
34
), and then remove the following components:
a.
Hard drive (see
Hard drive
on page
39
).
b.
SSD (see
SSD (M.2)
on page
41
).
c.
Fans (see
Fans
on page
48
).
NOTE:
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
Heat sink for hybrid graphics (see
Heat sink for hybrid graphics memory
on page
49
).
●
Heat sink for CPU and graphics (see
Heat sink for CPU and graphics
on page
50
).
●
WLAN module (see
WLAN module
on page
44
)
●
Memory module (see
Memory
on page
42
)
●
RTC battery (see
RTC battery
on page
55
)
Remove the system board:
1.
Disconnect the following cables and zero-insertion force (ZIF) connectors from the system board:
●
Wireless antenna cable
(1)
●
Speaker cable
(2)
●
Keyboard cable
(3)
●
Display cable
(4)
●
USB board cable
(5)
●
TouchPad cable
(6)
●
Memory cable
(7)
54
Chapter 5
Removal and replacement procedures for authorized service provider parts