HP P4000 9.0 HP StorageWorks P4000 Multi-Site HA/DR Solution Pack User Guide - Page 23
Implementing a Multi-Site SAN, Before you begin, Preparing to install a new Multi-Site SAN
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2 Implementing a Multi-Site SAN After you have designed the Multi-Site SAN configuration, you are ready to implement it. Before you begin Install Multi-Site SAN feature keys on the storage systems you are going to use. Register your storage systems. For more information, see "Registering Advanced Features" in the HP StorageWorks P4000 SAN Solution User Manual for information about registering your storage systems. Have the following information ready: • The layout for storage systems and sites • IP addresses, subnets, and VIPs to use for the Multi-Site cluster. You can use one VIP per subnet. • (Optional) IP address and subnet for the Failover Manager Preparing to install a new Multi-Site SAN After you have finished planning the Multi-Site SAN and installed feature keys on the storage systems for the SAN, you are ready to begin installation. Preparing to convert an existing SAN to a Multi-Site SAN Converting an existing SAN to a Multi-Site SAN includes planning the site layout and network information along with the following considerations: • Do you need to move/remove data from the existing SAN before reconfiguring it? • Do you need to purchase additional storage systems to meet the requirement that each site have the same number of storage systems? • Do you need to reconfigure your network to take advantage of the Multi-Site SAN capabilities? See "Designing the network for the Multi-Site SAN" on page 13 for detailed information about setting up your network appropriately. Installing the Multi-Site SAN To install a Multi-Site SAN, use the Management Groups, Clusters, and Volumes Wizard. P4000 Multi-Site HA/DR Solution Pack user guide 23