HP P4000 9.0 HP StorageWorks P4000 Multi-Site HA/DR Solution Pack User Guide - Page 9
When to use Network RAID-10+2
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
When to use Network RAID-10+2 Using Network RAID-10+2 offers a level of data protection that enables the Multi-Site SAN to sustain a complete failure at one site and still maintain replicated data at the other site. For instance, with Network RAID-10+2 there are four copies of data for the volume on the SAN. In a two-site configuration, the Multi-Site SAN software puts two of the four copies in one site and the remaining two in the other. If a site fails, the remaining site still has two copies and remains fault-tolerant. 1. Volumes are configured with Network RAID-10+2 Figure 1 Sample configuration for two-site, data protection level Network RAID-10+2 . Configuring sites and quorum managers to achieve optimal high availability and redundancy Several recommended site configurations can be used with the Multi-Site SAN software. These configurations provide varying levels of availability and redundancy. Table 2 on page 10 shows the recommended configurations. Select the one that best matches your environment. P4000 Multi-Site HA/DR Solution Pack user guide 9