HP Pavilion 14-ab000 ab000 through 14 - ab099 Maintenance and Service Guide 1 - Page 65
Removing the display
View all HP Pavilion 14-ab000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Removing the display IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the display, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 31), and then remove the following components: a. Optical drive (see DVD±RW Double-Layer SuperMulti Drive on page 32). b. Bottom cover (see Bottom cover on page 34). Disconnect the display: 1. Disconnect the display cable from the ZIF connector (1) on the system board . 2. Disconnect the ambient light sensor cable (2) from the system board. 3. Remove the display cable from the clips in the routing path (3). 4. Disconnect the WLAN antenna cable(s) (4) from the WLAN module. 5. Remove the WLAN antenna cable(s) from the routing path clips (5). Remove the display: 1. Remove the five Phillips PM2.5×5.6 screws (1) that secure the display assembly to the computer. CAUTION: Support the display assembly when removing the screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 2. Rotate the hinges away from the bottom cover (2). Component replacement procedures 55