HP Pavilion 14-n100 Maintenance and Service Guide - Page 109
Remove the 5 Phillips PM2.5×6.5 screws
View all HP Pavilion 14-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
● Pearl white ● Raspberry ● Regal purple ● Revolutionary blue ● Silver 734409-001 736816-001 734412-001 734411-001 734413-001 Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 49), and then remove the following components: a. Optical drive (see Optical drive on page 55) b. WLAN module (see WLAN module on page 53) c. Memory module (see Memory module on page 51) d. Keyboard (see Keyboard on page 62) e. Top cover (see Top cover on page 67) f. Hard drive (see Hard drive on page 71) g. System board (see System board on page 80) Remove the display assembly: 1. Remove the 5 Phillips PM2.5×6.5 screws (1) that secure the display assembly to the base enclosure. Component replacement procedures 99