HP Pavilion 14-n100 Maintenance and Service Guide - Page 88

Optical drive connector cable, and then remove the following components

Get HP Pavilion 14-n100 PDF manuals and user guides View all HP Pavilion 14-n100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

6. Remove the TouchPad button board (5). Reverse this procedure to install the TouchPad button board. Optical drive connector cable NOTE: The optical drive connector cable is included with the Optical Drive, spare part number 734415-001. Before removing the optical drive connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 49), and then remove the following components: a. Optical drive (see Optical drive on page 55) b. Service door (see Service door on page 50) c. WLAN module (see WLAN module on page 53) d. Memory module (see Memory module on page 51) 78 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
6.
Remove the TouchPad button board
(5)
.
Reverse this procedure to install the TouchPad button board.
Optical drive connector cable
NOTE:
The optical drive connector cable is included with the Optical Drive, spare part number
734415-001.
Before removing the optical drive connector cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
49
), and then remove the following components:
a.
Optical drive (see
Optical drive
on page
55
)
b.
Service door (see
Service door
on page
50
)
c.
WLAN module (see
WLAN module
on page
53
)
d.
Memory module (see
Memory module
on page
51
)
78
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts