HP Pavilion 15-ck000 Maintenance and Service Guide - Page 42

Hard drive, Release the zero insertion force ZIF connector

Get HP Pavilion 15-ck000 PDF manuals and user guides View all HP Pavilion 15-ck000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket or the hard drive cable. The hard drive bracket is available using spare part number 933608-001. The hard drive cable is available using spare part number L01855-001. Description 2-TB, 5400-rpm, SATA, 7.0-mm hard drive 1-TB, 5400-rpm, SATA, 7.0-mm hard drive 500-GB, 5400-rpm, SATA, 7.0-mm hard drive Spare part number 912487-855 762990-005 788186-005 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 33). Remove the hard drive: 1. Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then disconnect the hard drive cable from the system board. 2. Lift the right side of the hard drive (2) until it rests at an angle. 3. Remove the hard drive (3) by sliding it up and to the right at an angle. 34 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket or the hard drive cable. The hard
drive bracket is available using spare part number 933608-001. The hard drive cable is available using spare
part number L01855-001.
Description
Spare part number
2-TB, 5400-rpm, SATA, 7.0-mm hard drive
912487-855
1-TB, 5400-rpm, SATA, 7.0-mm hard drive
762990-005
500-GB, 5400-rpm, SATA, 7.0-mm hard drive
788186-005
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
31
).
5.
Remove the battery (see
Battery
on page
33
).
Remove the hard drive:
1.
Release the zero insertion force (ZIF) connector
(1)
to which the hard drive cable is connected, and then
disconnect the hard drive cable from the system board.
2.
Lift the right side of the hard drive
(2)
until it rests at an angle.
3.
Remove the hard drive
(3)
by sliding it up and to the right at an angle.
34
Chapter 5
Removal and replacement procedures