HP Pavilion 15-ck000 Maintenance and Service Guide - Page 57

Display panel ZIF connector cable, Power connector cable

Get HP Pavilion 15-ck000 PDF manuals and user guides View all HP Pavilion 15-ck000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 31), and then remove the following components: a. Battery (see Battery on page 33) b. WLAN module (see WLAN module on page 37) c. Fan (see Fan on page 46) When replacing the system board, be sure to remove the following components from the defective system board and install them on the replacement system board: ● Memory module (see Memory module on page 35) ● Solid-state drive (see Solid-state drive on page 39) ● Heat sink (see Heat sink on page 51) Remove the system board: 1. Disconnect the following cables: (1) Display panel ZIF connector cable (2) Power connector cable (3) Webcam/microphone module cable (4) Speaker cable (5) Connector board ZIF connector cable (6) Audio jack board ZIF connector cable (7) TouchPad ZIF connector cable (8) Keyboard ZIF connector cable (9) Backlight ZIF connector cable (10) Hard drive ZIF connector cable Component replacement procedures 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
31
), and then remove the following components:
a.
Battery (see
Battery
on page
33
)
b.
WLAN module (see
WLAN module
on page
37
)
c.
Fan (see
Fan
on page
46
)
When replacing the system board, be sure to remove the following components from the defective system
board and install them on the replacement system board:
●
Memory module (see
Memory module
on page
35
)
●
Solid-state drive (see
Solid-state drive
on page
39
)
●
Heat sink (see
Heat sink
on page
51
)
Remove the system board:
1.
Disconnect the following cables:
(1)
Display panel ZIF connector cable
(2)
Power connector cable
(3)
Webcam/microphone module cable
(4)
Speaker cable
(5)
Connector board ZIF connector cable
(6)
Audio jack board ZIF connector cable
(7)
TouchPad ZIF connector cable
(8)
Keyboard ZIF connector cable
(9)
Backlight ZIF connector cable
(10)
Hard drive ZIF connector cable
Component replacement procedures
49