HP Pavilion 15-ck000 Maintenance and Service Guide - Page 59
Heat sink, Battery see
View all HP Pavilion 15-ck000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
4. Remove the system board (2) by sliding it up and to the right at an angle. Reverse this procedure to install the system board. Heat sink NOTE: The heat sink spare part kit includes replacement thermal material. Description Spare part number For use only on computer models equipped with an NVIDIA N16S-GTR (GeForce 940MX) graphics subsystem 927920-001 For use only on computer models equipped with an NVIDIA N17S-G1 (GeForce MX150) graphics subsystem L02817-001 For use only on computer models equipped with a graphics subsystem with UMA memory 927919-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31), and then remove the following components: a. Battery (see Battery on page 33) b. WLAN module (see WLAN module on page 37) c. Fan (see Fan on page 46) d. System board (see System board on page 48) Remove the heat sink: NOTE: Steps 1 and 2 apply to computer models equipped with a graphics subsystem with discrete memory. 1. Remove the six Phillips M2.0×3.0 screws (1) that secure the heat sink to the system board. Component replacement procedures 51