HP Pavilion 15-ck000 Maintenance and Service Guide - Page 50

Power connector cable, Remove the three Phillips M2.5×6.7 screws

Get HP Pavilion 15-ck000 PDF manuals and user guides View all HP Pavilion 15-ck000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

6. Remove the TouchPad (4). Reverse this procedure to install the TouchPad. Power connector cable Description Power connector cable Spare part number L01853-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 33). Remove the power connector cable: 1. Remove the three Phillips M2.5×6.7 screws (1) that secure the right display hinge to the keyboard/ top cover. 2. Swing the right display hinge (2) up and back until the power connector cable is accessible. 3. Disconnect the power connector cable (3) from the system board 42 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
6.
Remove the TouchPad
(4)
.
Reverse this procedure to install the TouchPad.
Power connector cable
Description
Spare part number
Power connector cable
L01853-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
31
).
5.
Remove the battery (see
Battery
on page
33
).
Remove the power connector cable:
1.
Remove the three Phillips M2.5×6.7 screws
(1)
that secure the right display hinge to the keyboard/
top cover.
2.
Swing the right display hinge
(2)
up and back until the power connector cable is accessible.
3.
Disconnect the power connector cable
(3)
from the system board
42
Chapter 5
Removal and replacement procedures