HP Pavilion 15-ck000 Maintenance and Service Guide - Page 49
TouchPad, Release the shielding
View all HP Pavilion 15-ck000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
TouchPad NOTE: The TouchPad spare part kit does not include the TouchPad bracket or TouchPad cable. The TouchPad bracket is available using spare part number 926879-001. The TouchPad cable is available using spare part number L01851-001. Description TouchPad Spare part number L02816-001 Before removing the TouchPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 33). Remove the TouchPad: 1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Release the shielding (2) and tape (3) that cover the TouchPad. 3. Remove the three Phillips M2.0×3.0 screws (1) that secure the TouchPad bracket to the keyboard/ top cover. 4. Remove the TouchPad bracket (2). 5. Remove the three Phillips M2.0×2.4 broad head screws (3) that secure the TouchPad to the keyboard/ top cover. Component replacement procedures 41