HP Pavilion 17-ar000 Maintenance and Service Guide - Page 36

Hard drive, Remove the hard drive

Get HP Pavilion 17-ar000 PDF manuals and user guides View all HP Pavilion 17-ar000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket or the hard drive cable. The hard drive bracket is available using spare part number 926848-001. The hard drive cable is available using spare part number 933468-001. Description 2-TB, 5400-rpm, SATA, 7.0-mm hard drive 1-TB, 5400-rpm, SATA, 7.0-mm hard drive Spare part number 912487-855 778192-005 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the optical drive (see Optical drive on page 24). 5. Remove the bottom cover (see Bottom cover on page 25). 6. Remove the battery (see Battery on page 27). Remove the hard drive: 1. Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then disconnect the hard drive cable from the system board. 2. Lift the right side of the hard drive (2) until it rests at an angle. 3. Remove the hard drive (3) by sliding it up and to the right. 28 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket or the hard drive cable. The hard
drive bracket is available using spare part number 926848-001. The hard drive cable is available using spare
part number 933468-001.
Description
Spare part number
2-TB, 5400-rpm, SATA, 7.0-mm hard drive
912487-855
1-TB, 5400-rpm, SATA, 7.0-mm hard drive
778192-005
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the optical drive (see
Optical drive
on page
24
).
5.
Remove the bottom cover (see
Bottom cover
on page
25
).
6.
Remove the battery (see
Battery
on page
27
).
Remove the hard drive:
1.
Release the zero insertion force (ZIF) connector
(1)
to which the hard drive cable is connected, and then
disconnect the hard drive cable from the system board.
2.
Lift the right side of the hard drive
(2)
until it rests at an angle.
3.
Remove the hard drive
(3)
by sliding it up and to the right.
28
Chapter 5
Removal and replacement procedures