HP Pavilion 17-ar000 Maintenance and Service Guide - Page 50

Connector board cable, Remove the connector board cable

Get HP Pavilion 17-ar000 PDF manuals and user guides View all HP Pavilion 17-ar000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Connector board cable NOTE: The connector board spare part kit does not include the connector board cable. The connector board cable is available using spare part number 933466-001. Before removing the connector board cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the optical drive (see Optical drive on page 24), and then remove the following components: a. Bottom cover (see Bottom cover on page 25) b. Battery (see Battery on page 27) c. Fan (see Fan on page 36) d. System board (see System board on page 37) Remove the connector board cable: 1. Turn the system board upside down with the front toward you. 2. Release the ZIF connector (1) to which connector board cable is connected, and then disconnect the connector board cable from the system board. 3. Remove the connector board cable (2). 4. Remove the connector board cable. Reverse this procedure to install the connector board cable. 42 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Connector board cable
NOTE:
The connector board spare part kit does not include the connector board cable. The connector
board cable is available using spare part number 933466-001.
Before removing the connector board cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the optical drive (see
Optical drive
on page
24
), and then remove the following components:
a.
Bottom cover (see
Bottom cover
on page
25
)
b.
Battery (see
Battery
on page
27
)
c.
Fan (see
Fan
on page
36
)
d.
System board (see
System board
on page
37
)
Remove the connector board cable:
1.
Turn the system board upside down with the front toward you.
2.
Release the ZIF connector
(1)
to which connector board cable is connected, and then disconnect
the connector board cable from the system board.
3.
Remove the connector board cable
(2)
.
4.
Remove the connector board cable.
Reverse this procedure to install the connector board cable.
42
Chapter 5
Removal and replacement procedures