HP Pavilion 17-ar000 Maintenance and Service Guide - Page 51

Optical drive cable, Battery see

Get HP Pavilion 17-ar000 PDF manuals and user guides View all HP Pavilion 17-ar000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Optical drive cable NOTE: The optical drive spare part kit does not include the optical drive cable. The optical drive cable is available using spare part number 933469-001. Before removing the optical drive cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the optical drive (see Optical drive on page 24), and then remove the following components: a. Bottom cover (see Bottom cover on page 25) b. Battery (see Battery on page 27) c. Fan (see Fan on page 36) d. System board (see System board on page 37) Remove the optical drive cable: 1. Turn the system board upside down with the front toward you. 2. Release the ZIF connector (1) to which optical drive cable is connected, and then disconnect the optical drive cable from the system board. 3. Remove the optical drive cable (2). 4. Remove the optical drive cable. Reverse this procedure to install the optical drive cable. Component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Optical drive cable
NOTE:
The optical drive spare part kit does not include the optical drive cable. The optical drive cable is
available using spare part number 933469-001.
Before removing the optical drive cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the optical drive (see
Optical drive
on page
24
), and then remove the following components:
a.
Bottom cover (see
Bottom cover
on page
25
)
b.
Battery (see
Battery
on page
27
)
c.
Fan (see
Fan
on page
36
)
d.
System board (see
System board
on page
37
)
Remove the optical drive cable:
1.
Turn the system board upside down with the front toward you.
2.
Release the ZIF connector
(1)
to which optical drive cable is connected, and then disconnect the optical
drive cable from the system board.
3.
Remove the optical drive cable
(2)
.
4.
Remove the optical drive cable.
Reverse this procedure to install the optical drive cable.
Component replacement procedures
43