HP Pavilion Touch 14-n200 Maintenance and Service Guide 1 - Page 73
Hard drive, Remove the hard drive
View all HP Pavilion Touch 14-n200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive rubber bracket, hard drive connector cable, or screws. These components are included in the Hard Drive Hardware Kit, spare part number 740706-001. Description 1 TB, 5400 rpm, 9.5 mm 750 GB, 5400 rpm, 9.5 mm 500 GB, 5400 rpm, 7.0 mm 1 TB, 5400 rpm + 8 GB NAND hybrid, 9.5 mm, for use with computer models with Intel processors 750 GB 5400 rpm + 8 GB NAND hybrid, 9.5 mm, for use with computer models with Intel processors 500 GB 5400 rpm + 8 GB NAND hybrid, 7 mm, for use with computer models with Intel processors Spare part number 676521-005 634250-005 683802-005 731999-005 732001-005 732000-005 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 42), and then remove the following components: a. Service door (see Service door on page 43) b. Memory module (see Memory module on page 45) c. WLAN module (see WLAN module on page 47) d. Optical drive (see Optical drive on page 49) e. Keyboard (see Keyboard on page 55) f. Top cover (see Top cover on page 59) Remove the hard drive: 1. Disconnect the USB/audio cable (1) by flipping open the connector and lifting the cable. Remove the USB/audio cable Phillips M 2.5×3.0 screw (2) and then lift the USB/audio board (3). The USB/audio board spare part number is 734417-001. Component replacement procedures 63