HP Pavilion TouchSmart 14-f000 HP Pavillion Sleekbook 14 Maintenance and Servi - Page 44

Release the ZIF connector

Get HP Pavilion TouchSmart 14-f000 PDF manuals and user guides View all HP Pavilion TouchSmart 14-f000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

NOTE: When replacing the top cover, be sure to remove the following components from the defective top cover and install them on the replacement top cover: ● Power button board (see Power button board on page 36) ● TouchPad button board (see TouchPad button board on page 37) Remove the top cover: 1. Remove the eight Phillips PM2.5×5.6 screws that secure the top cover to the computer. 2. Remove the ten screws located on the top cover. 3. Release the ZIF connector (1) to which the power button board ribbon cable is connected, and then disconnect the power button board ribbon cable from the system board. 34 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
NOTE:
When replacing the top cover, be sure to remove the following components from the defective
top cover and install them on the replacement top cover:
●
Power button board (see
Power button board
on page
36
)
●
TouchPad button board (see
TouchPad button board
on page
37
)
Remove the top cover:
1.
Remove the eight Phillips PM2.5×5.6 screws that secure the top cover to the computer.
2.
Remove the ten screws located on the top cover.
3.
Release the ZIF connector
(1)
to which the power button board ribbon cable is connected, and
then disconnect the power button board ribbon cable from the system board.
34
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts